|
AutoLoader™
J-Style Kayak Carrier
Developed on the Coast of Maine to withstand the
brutal cross winds and crippling salt water corrosion. Malone
was the first in the industry to produce a J-style carrier
and the 2010 model continues to set the standard.
| Capacity |
70 lbs / 32" wide kayak |
| Dimensions |
14" (length) x 6" (width)
x 16" (height) |
| Frame |
Corrosion Free Polycarbon |
| Features |
• only carrier in the Market
with a built-in boarding ramp for easy kayak loading
and unloading
• flexes to fit boat for better contact and security
• universal fit JAWZ mounting hardware works with
round, square and most factory oval cross rails
• can assemble or transfer to another vehicle
in minutes with "no tools required"
• corrosion free and UV resistant
• cam style load straps with buckle protectors
• 50mm and 60mm pre-coated mounting bolts (larger
bolts available for purchase if needed)
• economical to add Telos Load Assist Module that
allows for single person loading at waist height |
SEAWING™
Traditional Kayak Carrier
Need extra roof space for cargo or a second kayak and concerned
about gas mileage? The low profile SeaWing™ is simply
in a class by itself. This kayak carrier combines single saddle
design and mid-point mounting to aid quick set-up and provide
extra roof space. The low profile of the SeaWing will flex
to gently cradle your boat and improve gas mileage.
| Capacity |
70 lbs / 32" wide kayak |
| Dimensions |
27" (length) x 6" (width)
x 5" (height) |
| Frame |
Corrosion Free Polycarbon |
| Padding |
ribbed synthetic rubber |
| Features |
• only bottom down carrier in
the market that allows roof space to transport two kayaks
because of the mid-point mounting system
• single cradle design provides easier set-up
by elminating the need to individuallly adjust each
saddle in a four point carrier
• gentle flex protects kayak at all times
• universal fit JAWZ mounting hardware works with
round, square and most factory oval cross rails
• can assemble or transfer to another vehicle
in minutes with "no tools required"
• corrosion free and UV resistant
• cam style load straps with buckle protectors
• 50mm and 60mm pre-coated mounting bolts (larger
bolts available for purchase if needed)
• economical to add Stinger Load Assist Module
(also sold as a combo package) tat facilitates single
person loading and eliminates contact between kayak
and vehicle |
Seawing Stinger combo
Carrier with attached Self-Loading System
Simplify the loading process while protecting your vehicle
and your kayak. The Combo is a complete loading and transport
system with retractable padded V-block frame. The SeaWing™
Stinger™ Combo is the most versatile and affordable
carrier / loader system available in the market today. It
doesn't get any easier than this to get out and enjoy your
kayak.
| Capacity |
70 lbs / 32" wide kayak |
| Dimensions |
27.5" (length) x 6" (width)
x 4.5" (height) |
| Frame |
Corrosion Proof Polycarbon |
| Padding |
ribbed synthetic rubber |
| Features |
• Sliding padded V-block extends
22" behind the carrier to secure, align and hold
the kayak in place during loading
• Padded frame protects kayak and vehicle and
eliminates any contact during loading
• Loading frame easily retracts back under carrier
during transport
• Combo system has all the bottom down carrier
features of the SeaWing including roof space for transporting
two kayaks
• Universal Fit JAWZ Mounting Hardware works with
Round, Square and Most Factory Oval Cross Rails
• Can assemble or transfer to another vehicle
in minutes with "No Tools Required"
• Corrosion Free and UV Resistant
• Cam Style Load Straps with Buckle Protectors
• 70mm Pre-coated mounting bolts (larger bolts
available for purchase if needed) |
Saddle Up Pro™
Adjustable saddle kayak carrier
Transporting large kayaks has neer been easier. The Saddle
Up Pro™ was designed with a flexible height adjustment
specifically for larger sit-in-top recreational and fishing
kayaks. By swapping out the rear felt loading saddles for
another set of high grip saddles, you have the added versatility
to adjust the saddles down to transport a lower profile boat,
paddleboard or surfboard.
| Capacity |
80 to 90 lb kayak/ adjustable to fit
any width kayak |
| Dimensions |
5" (length) x 5" (width)
x 9" (height) |
| Frame |
nylon and stainless steel hardware |
| Padding |
high density TPR rubber and 1/4"
felt |
| Features |
• the rear felt-lined saddles
facilitate easy loading and the front heavy duty rubber
saddles grip the boat for superior security and stability
during transport
• flexible four point saddle system allows heavier
boats to nestle down into the cradles for better contact
and protection regardless of kayak hull design
• universal fitJAWZ mounting hardware for round,
square and most factory oval cross rails
• simple assembly in minutes with "no tools
required"
• corrosion free and UV resistant
• 12' cam style H.D. polypropylene load straps
• 12' bow and stern safety tie-downs
• self-adjusting front and rear saddlesmay bepurchased
separately |
Stax Pro™
Folding vertical kayak carrier
The next level of innovation for vertical Stackers. Simply
the strongest and most stable folding stacker in the market.
The Malone Stax Pro™ universal car rack kayak carrier
combines the value of a stacker and the convenience of fold
down technology. One carrier can be used to transport 2 kayaks
stacked side by side on virtually any vehicle or up to 4 kayaks
strapped together on a trailer cross rail system.
| Capacity |
80 to 90 lb kayak/ 32" wide kayak |
| Dimensions |
5" (length) x 5" (width)
x 20" (height) |
| Frame |
aluminum and nylon |
| Features |
• Strongest and most stable folding
stacker available in the market with aluminum octagon
shaped posts
• Great economical option to transport multiple
kayaks
• Individual strap slots for two kayak transport
(Additional straps and bow & stern lines required
for additional kayaks)
• Stax Pro folds down for low clearance when not
in use
• Universal Fit JAWZ Mounting Hardware works with
Round, Square and Most Factory Oval Cross Rails
• Can assemble or transfer to another vehicle
in minutes with "No Tools Required"
• Totally rust resistant for years of service
• 12’ Cam Style H.D. polypropylene Load
Straps
• 12’ Bow & Stern Safety tie-downs |
Deluxe Kayak Kit
Complete Temporary Kayak Transport Kit
Great affordable alternative to permanent carriers when you
have someone to help load or you do infrequent transport.
Each packaged kit includes everything you need to temporarily
transport your kayak wherever you need to go. The large foam
blocks cushion your kayak on the roof of your vehicle while
the over-hull strap and bow & stern tie downs securely
hold the kayak in place during transport.
| Capacity |
70 lb kayak |
| Dimensions |
4" x 4.75" x 18" EVA
closed cell foam blocks (2) |
| Features |
• Two 18" non-skid laminate
foam blocks cushion kayak in place while evenly distributing
the weight of the kayak over the roof frame of the vehicle
to avoid heavy pressure points.
• Blocks conform to round, square or factory oval
cross rails or rest on top of vehicle without cross
rail system
• Foam blocks have exclusive universal fit V-shaped
cutout for a great fit every time.
• Two 9’ block tie down straps secure kayak
to foam blocks
• Bow & Stern S-hook tie downs secure kayak
to front and rear of vehicle
• Carrying case stores complete kit when not in
use |
Standard Kayak Kit
Temporary Kayak Transport Kit
Each kit includes everything you need to temporarily transport
a smaller light weight kayak home from the store or for occasional
seasonal use.
| Dimensions |
4" x 4.75" x 12" EVA
closed cell foam blocks (2) |
| Features |
• Two universal fit 12"
non-skid laminate foam blocks cushion kayak in place
and fit to round, square or factory oval cross rails.
12" blocks not recommended to go directly on roof
top as concentrated weight of kayak may dent roof top.
• Foam blocks have exclusive universal fit V-shaped
cutout for a great fit every time.
• One 15’ Over-hull Strap
• Bow & Stern S-hook tie downs secure kayak
to front and rear of vehicle
• Carrying case stores complete kit when not in
use |
Kayak Block (4" x 4.75" x 18")
Individual Foam Block
Do you need a replacement block or are you going to assemble
your own foam block kayak transport system? The 18" kayak
block included in the Deluxe Kayak Kit is available for individual
purchase. Non-skid laminate bottom foam block is shaped to
conform and cushion virtually any kayak hull shape and fits
round, square and factory oval cross rail systems.
Kayak Block (4" x 4.75" x 12")
Individual Foam Block
Do you need a replacement block or are you going to assemble
your own foam block kayak transport system? The 12" kayak
block included in the Standard Kayak Kit is available for
individual purchase. Non-skid laminate bottom foam block is
shaped to conform and cushion virtually any kayak hull shape
and fits round, square and factory oval cross rail systems.
|
